New Items

Check here for items too new to be listed in the catalogue yet!!

TALES OF TRIUMPH MOTORCYCLES & THE MERIDEN FACTORY

by Hughie Hancox

Limited number autographed by the author. A fascinating book in which Hughie tells the inside story of his life at the famous Meriden factory.
Part no. 89-CB1 $44.95

GAS TAP PLUNGERS
Upgrade your old, leaky BSA taps

Replace the old tubular cork type plungers fitted to most BSA's up to 1970 and also to many T100's and Tiger Cubs. Extensively tested with modern fuels. No apparent shelf life issues. These machined brass plungers have special viton "O" rings and kits are supplied complete with fitting instructions.

PART No 73105 $29.95

KING DICK WRENCHES - Made In England

As many customers will know, these were the UK made tools of choice and they are now back in production.

They were supplied in the original tool kits with many new bikes.

The following is a list of WHITWORTH wrenches we currently have available.

KD.CSW203

3/16" Combination Wrench $14.55

KD.CSW204

1/4" Combination Wrench $16.55

(Norton Twin Cylinder Head nuts)

KD.CSW205

5/16" Combination Wrench $19.18

KD.MSW203

3/16" Socket (3/8" Drive) $12.61

KD.MSW204

1/4" Socket (3/8" Drive) $12.61

(Norton Twin head nuts/bolts)

KD.MSW205

5/16" Socket (3/8" Drive) $12.61

KD.SLW603

3/16"X1/4" Open End Wrench $14.82

KD.SLW604

1/4"X5/16" Open End Wrench $16.18

KD.TKC5W

5 Piece Combination Set $85.85

KD.TKS552

9 Piece Boxed Socket Set $226.95

(3/8" Drive)

TRIUMPH ENGINE REBUILD AND CLASSIC CARBURATION DVDs

Exciting News!!!

We are delighted to announce that we have been appointed by Hughie Hancox, in conjunction with Cub Video Productions, to be their North American distributors for Hughie's Triumph Engine Rebuild and Classic Carburation DVD's. Formerly available in VHS format we will have good stocks of these DVD's in NTSC North American format before the end of July. Hughie was trained and employed at Meriden as a mechanical engineer from 1953 to 1973 and has years of first hand experience with Triumph engines and passes on his knowledge of the right way, the wrong way and the Triumph way.

Part No 99-CV2 $49.95 Canadian

Covers the total strip and rebuild of a 650cc pre-unit engine. Can be used to cover most 500cc and 650cc pre-unit engines 1946-1962.

Total running time 2 hours and 45 minutes

Part No 99-CV1 $49.95 Canadian.

Follows the total strip and rebuild of a 1970 TR6. Covers the engine and transmission and the information and principles apply to most 650cc Unit construction twins.

2 DVD set - total running time 3 hours and 10 minutes.

Part No 99-CV3 $23.95 Canadian

A basic guide for the home enthusiast to setting the idle mixture properly on Amal and SU Carburetors. Applies to most post war 4 stroke British motorcycles. Very good information on synchronization of twin carb set ups.

Total running time 44 minutes

COMMANDO HIGH-RIDER HANDLEBARS

Part No. 06-2588, 39.95.

FORK BUSH SETS

For Matchless, AJS and P11 Norton. Fits all 1955 and onward machines with 1 1/4" fork tubes.

Part No. 02-1495/2700. $79.95 for set of 4.

BATTERY BOXES

These look like the old type, but are shells to enable you to fit a modern battery inside. We have replaced the old boxes (part no 99-920) with the following range:

Beautifully made in England

Regular size - $54.65 ea

BAT05 "LUCAS"

BAT06 "LUCAS KING OF THE ROAD"

BAT07 "EXIDE"

Large "T" Shape $57.80 ea

BAT08 as used on Ariel Sq 4 etc

Small Type $49.95

BAT09 as used on Bantams etc

UK MADE ORIGINAL TYPE FORGED FOOTRESTS (PAIR) FOR 1965-70 650 TRIUMPH

Complete with mounting bolts and dowells. Part # 82-6069/9624, $125.00/pr.

News

Just Arrived - New Books

Upgrade your old leaky BSA taps

New Items